Fairway Farms Swim Club

Pool Systems Dashboard: Difference between revisions

← Older edit

Matt Parnell (talk | contribs)

3 user groups
1,219 edits
VisualWikitext
 
(One intermediate revision by the same user not shown)
Line 59: Line 59:


=== Filter Tank Pressure ===
=== Filter Tank Pressure ===
[[File:Tank Pressure Gauge Example.png|frame|An example of a tank pressure gauge.]]


Shows the pressure in pounds per square inch (psi) for a [[Sand Filters|sand filter]] tank per the PLC [[Pool Systems Automation#Filter Tank Pressure|Filter Tank Pressure]] measurement (via WiFi link).
Shows the pressure in pounds per square inch (psi) for a [[Sand Filters|sand filter]] tank per the PLC [[Pool Systems Automation#Filter Tank Pressure|Filter Tank Pressure]] measurement (via WiFi link).
Line 95: Line 93:


=== Surge Tank Level ===
=== Surge Tank Level ===
[[File:Surge Tank Depth Gauge Example.png|frame|An example of the surge tank level (depth) gauge.]]


Shows the level (depth) in inches for the surge tank per the PLC [[Pool Systems Automation#Surge Tank Level|Surge Tank Level]] measurement (via WiFi link).
Shows the level (depth) in inches for the surge tank per the PLC [[Pool Systems Automation#Surge Tank Level|Surge Tank Level]] measurement (via WiFi link).
Line 135: Line 131:


=== Out Flow ===
=== Out Flow ===
[[File:Out Flow Gauge Example.png|frame|An example of the out flow rate gauge.]]


Shows the out flow rate in gallons per minute (GPM).
Shows the out flow rate in gallons per minute (GPM).
Line 172: Line 166:


=== Inlet Temperature ===
=== Inlet Temperature ===
[[File:Inlet Temperature Gauge Example.png|frame|An example of the inlet temperature gauge.]]


Shows the inlet temperature in degrees Fahrenheit (°F) per the temperature controller measurement (via WiFi link).  This temperature is measured directly after the filter tanks, prior to the boiler loop (refer to the [[Process Flow Diagram]]).
Shows the inlet temperature in degrees Fahrenheit (°F) per the temperature controller measurement (via WiFi link).  This temperature is measured directly after the filter tanks, prior to the boiler loop (refer to the [[Process Flow Diagram]]).
Line 200: Line 192:


=== pH ===
=== pH ===
[[File:pH Gauge Example.png|frame|An example of the pH gauge.]]


Shows the sampled water pH per a [[Chemtrol Pool Controller]] measurement (via RS-485/Ethernet link).
Shows the sampled water pH per a [[Chemtrol Pool Controller]] measurement (via RS-485/Ethernet link).
Line 236: Line 226:


=== ORP ===
=== ORP ===
[[File:ORP Gauge Example.png|frame|An example of the ORP gauge.]]


Shows the sampled water oxidation reduction potential (ORP) per a [[Chemtrol Pool Controller]] measurement (via RS-485/Ethernet link).
Shows the sampled water oxidation reduction potential (ORP) per a [[Chemtrol Pool Controller]] measurement (via RS-485/Ethernet link).
Line 243: Line 231:
== Graphs ==
== Graphs ==


=== ORP ===
To be updated.
 
[[File:ORP Graph Example.png|frame|An example of an ORP graph.]]
 
The ORP graph shows the ORP measurement over time.  The graph shown contains two days worth of history.  Certain events, marked by numbers, can be identified:
 
# A valley indicates a ORP trend direction change.  This typically occurs when chlorine is added to the pool.
# Overshoot and leveling-off is common overnight, as a lack of UV (and to some extent, pool occupants) prevents the rapid breakdown of chlorine in the pool water.
# Two events are identified in this marker.  First, the gradual drop in ORP as the sun hits the pool (starting at about 7:30 am).  Then, like in #1, a rise in ORP as chlorine is added to the pool.  Overshoot is much lower in this instance, as the pool is occupied and mid-day sunshine contributes to rapid chlorine breakdown.
Retrieved from "https://wiki.fairwayfarmsswimclub.com/Pool_Systems_Dashboard"