Chemtrol Pool Controller: Difference between revisions
no edit summary
Matt Parnell (talk | contribs) No edit summary |
Matt Parnell (talk | contribs) No edit summary |
||
| Line 36: | Line 36: | ||
=== Technical Information=== | === Technical Information=== | ||
* The left-hand connectors (on the generation of controller that we own) for TDS/Temp, PWFS (paddle wheel flow sensor), Flow and PPM are Conxall/Switchcraft 4-position Mini-Con-X male pin connectors. The mating connectors are Conxall/Switchcraft 6282-4SG-311. | * The left-hand connectors (on the generation of controller that we own) for TDS/Temp, PWFS (paddle wheel flow sensor), Flow and PPM are Conxall/Switchcraft 4-position Mini-Con-X male pin connectors. The mating connectors are Conxall/Switchcraft 6282-4SG-311 and as of January 2021, they are stocked by multiple distributors (Digi-Key, etc). | ||
* The display is a Newhaven Display NHD-160128WG-BTMI-VZ#-1. If replacing, make note of the required backlight resistor modification. | * The display is a Newhaven Display NHD-160128WG-BTMI-VZ#-1. If replacing, make note of the required backlight resistor modification. Hawk Electronics of Buffalo Grove, IL stocks this part for $63.30 (as of January 2021). Replacement (at your own risk!) is fairly straightforward for an experienced technician; it requires simply the de-soldering of a header. | ||