Cleaning the Strainer Basket: Difference between revisions
→Disabling the Acid Pump
Matt Parnell (talk | contribs) |
Matt Parnell (talk | contribs) |
||
| Line 39: | Line 39: | ||
On the main screen, an "A" to right of the ORP reading indicates that the chlorinator is enabled (automatic control), "X" indicates it is disabled. | On the main screen, an "A" to right of the ORP reading indicates that the chlorinator is enabled (automatic control), "X" indicates it is disabled. | ||
==Disabling the Acid Pump== | ==Enabling or Disabling the Acid Pump== | ||
The acid pump is controlled by the Chemtrol unit. The instructions below assume that the Chemtrol unit is operating, and that the main screen is visible. | The acid pump is controlled by the Chemtrol unit. The instructions below assume that the Chemtrol unit is operating, and that the main screen is visible. | ||
| Line 46: | Line 46: | ||
# Select the pH sub-menu by pressing the right arrow. | # Select the pH sub-menu by pressing the right arrow. | ||
# The first item in the pH sub-menu selects the feed mode. Press the right arrow to change the mode. | # The first item in the pH sub-menu selects the feed mode. Press the right arrow to change the mode. | ||
# Press the up arrow until the pH feed mode is OFF. | # Press the up arrow until the pH feed mode is '''AUTO''' to enable or '''OFF''' to disable. | ||
# | # Press the left arrow twice to return to the main screen. | ||
On the main screen, | On the main screen, an "A" to the right of the pH reading indicates that the acid pump is enabled (automatic control), "X" indicates it is disabled. | ||
==Controlling the Pump== | ==Controlling the Pump== | ||
* To start or stop the pump, press the black START or red STOP button on the motor controller. | * To start or stop the pump, press the black START or red STOP button on the motor controller. | ||