Pool Boiler Temperature Controller: Difference between revisions
Jump to navigation
Jump to search
→Operating States
Matt Parnell (talk | contribs) |
Matt Parnell (talk | contribs) |
||
| Line 27: | Line 27: | ||
File:Boiler TC - Normal Operation.png|Normal Operation | File:Boiler TC - Normal Operation.png|Normal Operation | ||
File:Boiler TC - No Stage 2.png|No Stage 2 | File:Boiler TC - No Stage 2.png|No Stage 2 | ||
File:Boiler TC - Boiler Fault.png|Boiler Fault | |||
File:Boiler TC - Temp Low.png|Low Temperature Fault | |||
File:Boiler TC - Over Temp Shutdown.png|Over-Temperature Shutdown | File:Boiler TC - Over Temp Shutdown.png|Over-Temperature Shutdown | ||
</gallery> | </gallery> | ||
| Line 45: | Line 47: | ||
If this state is active, it may be desirable to adjust the recirculation valve positions. Since operating only in [[#Stage 1| Stage 1]] produces less heat, the ability to heat the pool is reduced. This is primarily an issue where the amount of heat loss in the pool exceeds the capability of [[#Stage 1| Stage 1]] heating (i.e. the pool cools faster than it can be heated). Consult with [[Board_Building_and_Grounds Building and Grounds]] if needed to properly adjust the valve positions. | If this state is active, it may be desirable to adjust the recirculation valve positions. Since operating only in [[#Stage 1| Stage 1]] produces less heat, the ability to heat the pool is reduced. This is primarily an issue where the amount of heat loss in the pool exceeds the capability of [[#Stage 1| Stage 1]] heating (i.e. the pool cools faster than it can be heated). Consult with [[Board_Building_and_Grounds Building and Grounds]] if needed to properly adjust the valve positions. | ||
==== Boiler Fault ==== | |||
==== Low Temperature Fault ==== | |||
==== High Temperature Fault ==== | |||
=== Changing Thresholds === | === Changing Thresholds === | ||