Pool Boiler Temperature Controller: Difference between revisions

Jump to navigation Jump to search
no edit summary
No edit summary
Line 23: Line 23:
=== LCD Display ===
=== LCD Display ===


An LCD display on the front of the controller indicates the temperature of the boiler manifold (top-most value).  Temperature thresholds for a [[#Low Temperature Fault|Low Temperature Fault]], [[#Stage 2|Stage 2]] operation and a [[#High Temperature Fault|High Temperature Fault]] are displayed on the subsequent lines.  
An LCD display on the front of the controller indicates the measured temperature of the boiler manifold (top-most value).  A graphical bar shows the value relative to the typical minimum and maximum operating thresholds.  Temperature thresholds for a [[#Low Temperature Fault|Low Temperature Fault]], [[#Stage 2|Stage 2]] operation, and a [[#High Temperature Fault|High Temperature Fault]] are displayed on the subsequent lines.  


in degrees Fahrenheit.  A graphical bar below the measured shows the value relative to the typical minimum and maximum operating thresholds.
All temperatures are displayed in degrees Fahrenheit.   
 
=== Stage Monitoring ===
 
At this time, no feedback is provided to the temperature controller to verify which stages are active; external conditions/faults may prevent firing stages.  See [[Pool_Boiler#Operation|Pool Boiler Operation]] for further details on how the controller contributes to the boiler interlocks.


=== Operating States ===
=== Operating States ===
Line 41: Line 45:
==== Normal Operation ====
==== Normal Operation ====


During normal operation, no user intervention is required.  The <tt>OP1</tt> and <tt>OP2</tt> beacons at the top of the display indicate that both [[#Stage 1|Stage 1]] and [[#Stage 2|Stage 2]] heating are enabled.  At this time, no feedback is provided to the temperature controller to identify if either stage is active; external conditions/faults may prevent firing stages.
During normal operation, no user intervention is required.  The <tt>OP1</tt> and <tt>OP2</tt> beacons at the top of the display indicate that both [[#Stage 1|Stage 1]] and [[#Stage 2|Stage 2]] heating are enabled.   


==== No Stage 2 ====
==== No Stage 2 ====

Navigation menu