Chemtrol Pool Controller: Difference between revisions
Jump to navigation
Jump to search
→Bypass Line Flow
Matt Parnell (talk | contribs) No edit summary |
Matt Parnell (talk | contribs) |
||
| Line 17: | Line 17: | ||
When there is insufficient flow, the message "Bypass Line" is shown at the bottom of the display. This also triggers an alarm (if configured). | When there is insufficient flow, the message "Bypass Line" is shown at the bottom of the display. This also triggers an alarm (if configured). | ||
According to the manual, the flow should be | According to the manual, the flow should be about 2-3 GPM. This can be adjusted by turning the "out" knob (leave the "in" knob fully open). In our system, up to 5-6 GPM seems to be a better target (when the system flow is optimal), allowing some margin. It is critical that there is enough flow to fully submerge the probe tips at all times to avoid damage. | ||
== Procedures == | == Procedures == | ||