Cleaning the Strainer Basket: Difference between revisions
Jump to navigation
Jump to search
no edit summary
Matt Parnell (talk | contribs) |
Matt Parnell (talk | contribs) No edit summary |
||
| Line 33: | Line 33: | ||
During the cleaning process, the Chemtrol sensor probes may no longer be in contact with water. If possible, shut off the bypass line outflow valve prior to stopping the main pump motor. This will keep the sensors submerged. Otherwise, be sure to minimize the amount of time the sensors are out of water, as they may be damaged if allowed to dry out. | During the cleaning process, the Chemtrol sensor probes may no longer be in contact with water. If possible, shut off the bypass line outflow valve prior to stopping the main pump motor. This will keep the sensors submerged. Otherwise, be sure to minimize the amount of time the sensors are out of water, as they may be damaged if allowed to dry out. | ||
Please keep the lower level (gallery) clean! Avoid leaving debris on the floor or in buckets. Periodic vacuuming is encouraged. Avoid allowing significant debris to enter the drain, as it may clog the pipe. | |||
== Controlling the Pump == | == Controlling the Pump == | ||
* To start or stop the pump, press the black START or red STOP button on the [[Pump Motor Starter]]. | * To start or stop the pump, press the black START or red STOP button on the [[Pump Motor Starter]]. | ||