Board Building and Grounds: Difference between revisions
→Late March to Early April: Water and Pool Opening
Matt Parnell (talk | contribs) |
Matt Parnell (talk | contribs) |
||
| Line 30: | Line 30: | ||
* Request water meter installation via the City of Livonia. The city installs approximately 1,500 seasonal meters, so request early. Typically, meter installation begins in late March. | * Request water meter installation via the City of Livonia. The city installs approximately 1,500 seasonal meters, so request early. Typically, meter installation begins in late March. | ||
** Once the water meter is installed, it is <u>our responsibility</u> to open the gate valve near the street. The city will <u>no longer</u> support turning the gate valve as of 2021. | ** Once the water meter is installed, it is <u>our responsibility</u> to open the gate valve near the street. The city will <u>no longer</u> support turning the gate valve as of 2021. | ||
** Do not turn on the water in the building at this point; doing so may void any warranty or guarantee provided during winterization. | ** Do not turn on the water in the building at this point; doing so may void any warranty or guarantee provided by the contractor during winterization. | ||
* Coordinate pool opening | * Coordinate pool opening with the contractor (i.e. Aquatic Source). | ||
** The water meter must be installed first. | ** The water meter must be installed first. | ||
** The pool should be opened at least one week prior to the club's opening day. Ideally, it should be opened much earlier (in April) to provide sufficient time to balance chemicals, solve issues, etc. | ** The pool should be opened at least one week prior to the club's opening day. Ideally, it should be opened much earlier (in April) to provide sufficient time to balance chemicals, solve issues, etc. | ||
| Line 37: | Line 37: | ||
** During opening, the cover will be removed, folded and placed on the deck. It is the responsibility of B&G to move and store it in the shed. | ** During opening, the cover will be removed, folded and placed on the deck. It is the responsibility of B&G to move and store it in the shed. | ||
* Lubricate the pump motor using the grease gun located in the pump house. Use Mobil Polyrex EM (or equivalent Polyurea grease for electric motors), 3-4 pumps per port (i.e. front and rear of motor). Lubrication should be performed twice per season. | * Lubricate the pump motor using the grease gun located in the pump house. Use Mobil Polyrex EM (or equivalent Polyurea grease for electric motors), 3-4 pumps per port (i.e. front and rear of motor). Lubrication should be performed twice per season. | ||
* Clean, calibrate, install and verify proper operation of the pH and ORP probes. Probes are expected to last 1-3 years between replacement. | |||
=== Early May: Coordinate Spring Clean-Up === | === Early May: Coordinate Spring Clean-Up === | ||